Page 1 of 1
Heated bed adjusters are at limit of travel.
Posted: Sat Apr 25, 2020 11:05 pm
by unclebill
Hi all, having problems trying to level heated bed. I find that 2 of the adjusters are at the limit of their travel and do not allow the bed to rise high enough for satisfactory levelling.
How do I remove the bed plate to get at the adjusters to fit them with washers to raise the plate?
Re: Heated bed adjusters are at limit of travel.
Posted: Mon Apr 27, 2020 11:05 am
by William
Hi，you can unscrew the screw and then remove the hotbed as shown below.
- 微信图片_20200427110438.png (612.79 KiB) Viewed 5325 times
- 微信图片_20200427110256.png (599.33 KiB) Viewed 5325 times
Re: Heated bed adjusters are at limit of travel.
Posted: Wed Apr 29, 2020 7:01 am
by unclebill
Thanks again William. How many nuts need to be removed to lift the heated plate? Looking at it quite closely it is very warped down the side that won't level. Is it straightenable? (is that a word???)
Re: Heated bed adjusters are at limit of travel.
Posted: Mon May 04, 2020 3:52 pm
by William
Hi，All four are adjustable. If the height is still not enough, you can also adjust the level switch by adjusting the Z axis.