Geeetech

Hi everyone,

I own a Geeetech A10 from 2019 and are relatively happy with it. I mostly print PLA sometime PETG and for this the stock hotend is doing a good job.

However, I do have some problems with the overhangs bending up on certain positions, this sometimes ruins prints in PLA.
I do think that the cooling is the biggest problem there, and I do not like the way the A10 part cooler ist built.

If found some solutions on thingiverse however, they are mostly for the E6D full-metal hotend and I have heard that that hotend will not be an improvement for PLA prints in comparision with the stock one.

Here is what I'v found:

Petsfang for A30 (should fit the A10 as well)
https://www.thingiverse.com/thing:2993902
This only seems to work for the E6D hotend and not for the stock version

Geetech A10 Part Cooling by NevG
https://www.thingiverse.com/thing:3114159
This is made for the stock hotend, however in my printer is a rectangular stockend - so there seem to be at least two different version for A10 hotends

Geeetech A10/A30 E3D_V6 & Stock hotend mount by madizom (and a good remix: https://www.thingiverse.com/thing:3377458)
https://www.thingiverse.com/thing:2984898
This supposedly has a stock hotend version, however it is not mentioned which one - and I guess it is for a roundish hotend...

So my questions:
Does anyone know how many "stock" hotends are exist for the A10?
(Mine looks like this: https://www.geeetech.com/geeetech-a10-a ... -1041.html)
Has anyone fitted his stock hotend in above mentioned part coolers?
Has anyone found or made a good (similar to the above) part cooler for the Geeetech A10 with the rectangular hotend?


Thanks for any help.

Best,
Jan