Page 1 of 1
A10 with GT2560 v3.1 - Question about fan voltages
Posted: Wed Mar 25, 2020 2:44 pm
by bornlivedie
I'm planning to change the stock fan for a beefier 24v fan, but my question is, do the fans run at 24v or 12v?
I have the A10 with the GT2560 v3.1 board.
Thanks!
Re: A10 with GT2560 v3.1 - Question about fan voltages
Posted: Wed Mar 25, 2020 2:47 pm
by William
Hi, your motherboard supports 24V.
Re: A10 with GT2560 v3.1 - Question about fan voltages
Posted: Wed Mar 25, 2020 8:24 pm
by bornlivedie
William wrote: ↑Wed Mar 25, 2020 2:47 pm
Hi, your motherboard supports 24V.
Thank you, William. I know the PSU is 24v and that the motherboard allows it, but, does it take advantage of that out of the box? I know the old boards didn't and you had to jump two points for fans to work at 24v.
Thanks!
Re: A10 with GT2560 v3.1 - Question about fan voltages
Posted: Sat Mar 28, 2020 8:44 am
by bornlivedie
Neverwind, I just measured the voltage with a multimeter. I can confirm it runs at 24v.