Geeetech

Posted: **Tue Mar 17, 2020 6:31 pm**

Hi!

I have a A10 with a GT2560 rev B and I want to install a BL Touch, but on the motherboard there aren’t the pins to connect it, so I suppose that it’s impossible to install it.
I would change the motherboard with a GT2560 V3, so I can install the BL Touch.
Is it possible? Which wires and connectors i have to change?

Thanks

Posted: **Tue Mar 17, 2020 6:54 pm**

Hi, you can't install 3d touch on the machine's adapter board?
If the motherboard is replaced, the motherboard of the GT2560 rev b is 12V.
The motherboard of GT2560 V3.0 is 24V,
Not recommended for replacement,
Because the corresponding voltage wiring and motor need to be replaced accordingly.

Posted: **Tue Mar 17, 2020 7:13 pm**

Hi William, does this mean that there is nothing I can do to install the 3D Touch?

Posted: **Wed Mar 18, 2020 10:30 am**

Hi,Neptune96 you can look at your adapter board,
See if you can install a capacitive sensor,
Because the A30 has undergone a revision process,
There are 12V and 24V,
Versions are also divided into different categories based on the hardware version,
Can your printer print by leveling manually?

Geeetech

Change GT2560 rev B with GT2560 V3 for A10

Change GT2560 rev B with GT2560 V3 for A10

Re: Change GT2560 rev B with GT2560 V3 for A10

Re: Change GT2560 rev B with GT2560 V3 for A10

Re: Change GT2560 rev B with GT2560 V3 for A10