Carriage options
-
RoyalStarfox
- Posts: 3
- Joined: Mon Jan 20, 2020 7:20 am
Carriage options
So I bought my A10M quite a while ago, and while I was assembling it at the time, I noticed that the carriage was bent so the wheel couldn't quite hold onto the X axis the way it needed to. I bent it into place, just deciding at the time I wanted it done and over with. After quite a bit more work I've done with the printer to upgrade it, I've become curious, is it possible to buy a replacement carriage? I haven't been able to find any options to get another one with the same layout as what the A10M needs and I'd prefer to not have to print one like I've seen others doing. Does anybody have any suggestions around this?
Re: Carriage options
Hi,If the stand is bent, you can contact your sales representative.
-Keep your mind and try to test it. 
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-
RoyalStarfox
- Posts: 3
- Joined: Mon Jan 20, 2020 7:20 am
Re: Carriage options
I have adjusted the nut, but the metal of the carriage, itself, is still feeling flimsy after the bend. And I mean the metal plate that is the carriage, itself, not the cage. How can I contact a sales representative?