Geeetech A10M firmware missing for A10M version GT2560V4 with +CH340 Support 3Dtouch
Posted: Sun Jan 26, 2020 3:00 am
Hi all,
We have been trying to install 3d Touch on our A10M printer version GT2560V4. One issue that we faced and solved already was the fact that the pinout of the extruder was not aligned with the manual
http://www.geeetech.com/Documents/3DTou ... Manual.pdf
Nevertheless by following the pictures on post
viewtopic.php?f=120&t=69660&p=104588&hi ... ch#p104588
we have been able to connect it correctly.
Where we would like your help is regarding the official Geeetech firmware availability for this printer config "GT2560V4 +CH340 Support 3Dtouch". By following the link to the latest software firmware for printers A10M
https://www.geeetech.com/download.html?download_id=31
the option "A10M GT2560V4+CH340 Support 3Dtouch" seems to be missing. Could you please upload this firmware version?
We have been trying to install 3d Touch on our A10M printer version GT2560V4. One issue that we faced and solved already was the fact that the pinout of the extruder was not aligned with the manual
http://www.geeetech.com/Documents/3DTou ... Manual.pdf
Nevertheless by following the pictures on post
viewtopic.php?f=120&t=69660&p=104588&hi ... ch#p104588
we have been able to connect it correctly.
Where we would like your help is regarding the official Geeetech firmware availability for this printer config "GT2560V4 +CH340 Support 3Dtouch". By following the link to the latest software firmware for printers A10M
https://www.geeetech.com/download.html?download_id=31
the option "A10M GT2560V4+CH340 Support 3Dtouch" seems to be missing. Could you please upload this firmware version?