Y Axis Limits

Post Reply
Cg83
Posts: 12
Joined: Sat Nov 16, 2019 8:25 am

Y Axis Limits

Post by Cg83 » Sat Jan 25, 2020 3:46 pm

Running an A10M with verts Marlin Dev build 466 and Cura 4.4. Any time my bed goes to the front (away from the y axis limit switch) it goes too far and grinds. its not much but enough to need adjusted. Where would setting be to adjust that?
Top
Post Reply

Return to “Geeetech A10 Series”