Page 1 of 1

auto home causes chattering

Posted: Sun Jan 05, 2020 1:39 am
by pawa10m
Whenever you "auto home" the hot end chatters in the bottom left corner. cannot proceed. cannot print, please advise fix.[ This is a new A10M

Re: auto home causes chattering

Posted: Sun Jan 05, 2020 5:29 am
by Jarda3d
Z axis switch have bad contact. DIsconnect&connect it few times to get out oxides from contacts.

Re: auto home causes chattering

Posted: Thu Feb 06, 2020 2:34 am
by pawa10m
Upon disconnecting the Z stop wiring I found the harness disconnected from the motherboard! How do I repair this? The third screw is under the carriage.