Geeetech

Here you can share you great ideas about hardware innovation. Here you can enjoy more professional and specialized services, Here is a platform for you to make a difference!
http://geeetech.net/forum/

Thin extrusion on one side of bed

http://geeetech.net/forum/viewtopic.php?f=98&t=69781

Page 1 of 1

Thin extrusion on one side of bed

Posted: Thu Dec 26, 2019 3:00 am
by evant8950
Hey Everyone

I cannot figure out what is wrong. Everything I have tried to print the right side of the bed always has thinner first layer. I have the 3D Touch installed for bed leveling. See the attached picture of a primer line.

Re: Thin extrusion on one side of bed

Posted: Thu Dec 26, 2019 9:28 am
by William
:D Hi, If you are using a 0.4 nozzle,
Layer height is set to 80% of the nozzle.

I hope this can help you.

Re: Thin extrusion on one side of bed

Posted: Fri Dec 27, 2019 4:05 am
by evant8950
Thank you. Let me adjust my layer height and see what happens.
All times are UTC+08:00
Page 1 of 1
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/