Page 1 of 1
Extruder feed temperamental!!
Posted: Wed Sep 04, 2019 3:52 pm
by thetechguy1
Why does the feed extruder up at the filament only move when it wants to. Same setting, same file and it doesn't feed material. Stop print, auto home, try again and it feeds. Drives me crazy.
Re: Extruder feed temperamental!!
Posted: Wed Sep 04, 2019 4:08 pm
by William
Hi, You can check if your nozzle is clogged and the extruder motor can rotate normally when printing.
Can you provide a specific video or picture?
So that we can solve the problem better.
