Setup Problem

Post Reply
BobN2
Posts: 1
Joined: Fri Jun 14, 2019 2:55 am

Setup Problem

Post by BobN2 » Mon Jun 17, 2019 11:46 pm

Hello, I just bought an A10, and the set up all went smoothly, but when I plug it in, the display does not turn on, but when I was moving the tray, I noticed the screen lit up a little. I don’t know what’s wrong or what I’m doing wrong.
Top
wotor
Posts: 51
Joined: Tue Dec 26, 2017 1:18 am

Re: Setup Problem

Post by wotor » Tue Jun 18, 2019 6:24 am

Most likely your ribbon lcd connector is loose either way by lcd side or motherboard side. Check them, reconnect and lock.
Top
User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Setup Problem

Post by William » Tue Jun 18, 2019 10:14 am

Hi, You can try to re-plug the cable to the LCD screen.
-Keep your mind and try to test it. :)
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Top
Post Reply

Return to “Geeetech A10 Series”