My Geeetech A10 with Gt2560 v3.0 stopped working with Lcd flashing.
With multimeter i tested all fuse and they are ok. All fans are not working. Power supply S-360-24 has only 10V of output voltage. It has to be 24V or 12V? The problem is too low voltage?
Thank you.
Power supply issue?
Re: Power supply issue?
HI, all the fans need 24 v or 12 v, you can lifting voltage.
-Keep your mind and try to test it. 
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Re: Power supply issue?
Hello.
The power supply probably malfunctioned.
The power supply probably malfunctioned.
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.