A10M Marlin 1.1.9 with Mesh Bed Leveling by Hochdruck3D
Posted: Sat Mar 23, 2019 3:50 am
Hey Guys,
because i had problems with all other Marlin 1.1.9 versions, i created a new one.
it has all features from the stock Firmware ( Mixer and so on...)
BUT i implemented Mesh Bed Leveling and made the second extruder avaliable for callibration.
After the first start please click on initialize eeprom
if you have some Questions or Problems, let me hear it .
here is the Firmware:
https://www.thingiverse.com/thing:3510394
because i had problems with all other Marlin 1.1.9 versions, i created a new one.
it has all features from the stock Firmware ( Mixer and so on...)
BUT i implemented Mesh Bed Leveling and made the second extruder avaliable for callibration.
After the first start please click on initialize eeprom
if you have some Questions or Problems, let me hear it .
here is the Firmware:
https://www.thingiverse.com/thing:3510394