Geeetech

Hi,

I've just receive my new A10 and I've got several quality issues .

First : the printhead is moving in all position even if I put the eccentric in the highest position => the printhead structure seem to be twist (see picture) Second when I move the bed at several position the bed not move smoothly. I've seen in this video [url]https://www.youtube.com/watch?v=xywoLFzn66A at 2:20 the issue seems to be due to "bump" and bed wheel.

with theses two first issues I can't use the printer.

Geeetech team or someone can help me ? For me it's quality issues and warranty must be apply...

regards

thanks for your answer. I've check the printhead wheel and event if I play with the eccentric screew the wheel turn and all the print head move from front to back, up and down and rotate

on the below video the eccentric is turn at the highest position that can
https://www.facebook.com/gedeon.donias/ ... 622804448/

I've fixed the first issue by disassemble all the printhead and bend the metal guide to have a straight line . Now it's ok.

For the second issu I've not found any solution yet. I've played with eccentric but nothing, the bed still not moving smoothly and I've got a wobble effect

You need to ask the sales send you the Vslot wheels and the Y axis guide

William wrote: ↑

Wed Jan 16, 2019 11:51 pm

You need to ask the sales send you the Vslot wheels and the Y axis guide

I've contact geeetech (I've bought printer on the official web site store) but for the moment no answer. I will try to have a new Y-guide and wheels under warranty and I hope Geeetech will accept