A10M_Extrudrer work only with one filament

Post Reply
riccardoA
Posts: 6
Joined: Tue Jan 08, 2019 10:43 pm

A10M_Extrudrer work only with one filament

Post by riccardoA » Mon Jan 14, 2019 5:15 pm

Hi,
I removed the nozzle and put the filament manually into the extruder. Only the right-hand filament flows, while the left-hand filament is blocked. I tried to clean with the tool provided but does not change anything. Can someone suggest a solution? thank you.
Top
Post Reply

Return to “Geeetech A10 Series”