My new Geeetech A10 is not working correctly.
I can level it correctly and everything seems to work well but when it goes to print it hangs, the led screen goes blank and stops working.
The same thing happens with a temperature test of the hotbed. I think the problem must be related to the feeding of the warm bed.
Two videos with the issues. One trying to print and the other trying to heat the bed.
https://drive.google.com/file/d/1Eee-WT ... sp=sharing
https://drive.google.com/file/d/17yquYc ... sp=sharing
What I can do?
Thank you in advance.
A10 hangs when printing or heating the bed
Re: A10 hangs when printing or heating the bed
Solved.
The clips holding the print surface to the heat bed was creating a short circuit.
The clips holding the print surface to the heat bed was creating a short circuit.
Re: A10 hangs when printing or heating the bed
Hello.
Applause for working independently and solving the problem
Applause for working independently and solving the problem
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.