Geeetech

Hi,

I have set up the temperatures to 185°C for PLA and 70°C for bed, but whenever I start a print PLA temp jumps to 200°C and bed temp goes down to 60°C.

My exact temperature settings in Cura are as follows:

Print Setup:
- Default Printing Temperature: 185°C
- Printing Temperature: 185°C
- Printing Temperature Initial Layer: 185°C
- Initial Printing Temperature: 175°C
- Final Printing Temperature: 170°C
- Default Build Plate Temperature: 70°C
- Build Plate Temperature: 70°C
- Build Plate Temperature Initial Layer: 70°C

Material:
- Default Printing Temperature: 185°C
- Default Build Plate Temperature: 70°C
- Standby Temperature: 175°C

How do I fix that? Am I missing another setting?

Hello.


You've probably forgotten about the additional configuration in the slicer, or the printer itself.

Have a look again everywhere.

Also check if your startup scripts do not have a static entry of temperature settings.

In 'Manage Printers' / Machine Settings take a look at the Start G-Code


I BET that the two lines
are in there and either commenting them out with a semi colon or deleting them entirely will fix this.

That's it! I added a semicolon at the beginning of both lines and now my temp settings are used. Thanks!

Thanks, this was the answer I was looking for too

thanks, that was driving me bonkers.

I have the same issue with the machine overriding Cura temperature settings. I checked the starting code and there is no such line. Changing the settings in firmware seems to do nothing.

I have another issue with printing single colors. Cura slices my models and they look fine, but they print a blend instead of different colors. If I try to print a single color file I get the blend, even if I disable the unused extruder.