Geeetech

Hi guys!
Are you can't find Geeetech A10 on Cura?
Don't worry
Refer to these:
------------------------------ --------------------------------------------------
------------------------------------------------------------------------------------
Update:Thanks for @vert's suggestions.
1. We added the G29 for the start code
We added the "G1 Y230 F6000" for the end code（ 2019/1/7）
-----------------------------------------------------------------------------------------
2. We attached the PLA filament profile for Multi_mixer printer（2019/1/23）
-----------------------------------------------------------------------------------------
3. We set the default filament diameter to 1.75mm and it can work with Cura 4.0(2019/4/7)
-----------------------------------------------------------------------------------------
4.Thanks for @LisaE‘s suggestions.The profile updated.(2019.4.17)
-----------------------------------------------------------------------------------------
5. Deleted the "Heating gcode for nozzle/hotbed"in"start code".Added the meshes file.(2019.4.24)





1.Download Profile for Geeetech 3Dprinter Download the PLA filament profile for A30
------------------------------ --------------------------------------------------
------------------------------------------------------------------------------------
2. Unzip the zip file then you will get "resources"folder ------------------------------------------------------------------------------------
------------------------------------------------------------------------------------
3.Copy "resources" to the
Cura installation directory
Default:
C:\Program Files\Ultimaker Cura 4.0 ------------------------------------------------------------------------------------
------------------------------------------------------------------------------------
4.Import filament profile ------------------------------------------------------------------------------------
------------------------------------------------------------------------------------
5.Done!Enjoy it!

Can you do one for the A10M?

Thank you for preparing and sharing this.

Yes can you please do one for the A10M ?
Thanks

My printer is coming. so it would be great to have the A10M settings for cura

I did this and now Cura is starting my print too high and/under extruding. Switched back to Repetier Host and no problems at all with same bed level etc.

How to add the Extruder from A10 to Cura????
what is with the Extruder? All entrys are empty in thes Geeetech A10 Driver.
Or how can say wher i find a Post with thes answer.

it´s my first time in 3d-Printing and i´m an absolutly beginner, but i hope that ist will be better with your help

than´s and have a nice time

Warning: this file only works for PLA Yesterday I tried to print PETG, but initial gcode lowered the temperature to 200 * C without permission. This file was the Problem.

Is there going to be a file made for the A10M? I would think that shouldnt be a problem for the developers especially when it is a recommended program!! I tried the custom route as suggested in the manual but the latest version of Cura does not give the FDM printer option only the FFM, as a result Cura does not seem to communicate with the printer.

Hi, brand new to the world 3D printer. I just got the A10 and trying to set up it's profile on Cura for it (Cura 4.4) and when i put the resource from the zip folder here into the cura folder in Programs, all the other printers appear but not the A10. Any suggestions?

when i look in the folder I see it there but Cura doesn't seem to pick it up in the list of printers.

Thank you