A10M - first start-up.

Post Reply
BinhLy
Posts: 8
Joined: Thu Feb 28, 2019 9:25 am

A10M - first start-up.

Post by BinhLy » Thu Feb 28, 2019 10:58 pm

I just assembled new A10M 2 color mixed printer. I installed driver (anywhere okd) for my MacOS but I can't see the printer via USB. The LCD panel show 2 rows of dark dots and green background. I installed Aguire, Marlin, and Repetier etc but the LCD is still the same. My Mac Book still cannot see the A10M. How and where do you adjust LCD brightness or contrast for the new board? How to make my Mac connect to the printer. I tried CH341 driver for Mac. Didnot work.
Top
KendoMcCaff
Posts: 13
Joined: Fri Feb 22, 2019 4:35 pm

Re: A10M - first start-up.

Post by KendoMcCaff » Thu Feb 28, 2019 11:25 pm

try this
https://www.geeetech.com/forum/viewtopic.php?t=16288
Top
Dus10lee
Posts: 12
Joined: Fri Mar 01, 2019 5:08 am

Re: A10M - first start-up.

Post by Dus10lee » Fri Mar 01, 2019 5:09 am

Press reset button. Mine is doing that as well.
Top
Dus10lee
Posts: 12
Joined: Fri Mar 01, 2019 5:08 am

Re: A10M - first start-up.

Post by Dus10lee » Sun Mar 10, 2019 3:07 pm

Idk if it will help but try removing the SD card and pressing the reset button. I noticed every time I powered off and back on I was getting that screen, but only when the SD card was inserted. I started using a brand name as SD card and no longer have the issue
Top
Post Reply

Return to “Geeetech A10 Series”