Temperature fluctuates on Nozzle and Bed

Post Reply
Duckdodgers
Posts: 4
Joined: Fri Jan 15, 2021 8:00 am

Temperature fluctuates on Nozzle and Bed

Post by Duckdodgers » Thu Nov 04, 2021 3:59 am

Hello,

For a while now I have had an unsteady temperatuire on my nozzle, but did not know what it was. Today I caught the temperature of the nozle and bed dip during warm up. Does anyone have an idea of what is going on?

Duck
Temp_on_Warmup.jpg
Temp_on_Warmup.jpg (131.5 KiB) Viewed 2896 times

User avatar
Admin
Posts: 486
Joined: Wed Nov 30, 2011 9:49 am

Re: Temperature fluctuates on Nozzle and Bed

Post by Admin » Thu Nov 04, 2021 4:37 pm

If the temp of nozzle and hotbed drop suddenly at the same time, I think the motherboard is damaged.

User avatar
Admin
Posts: 486
Joined: Wed Nov 30, 2011 9:49 am

Re: Temperature fluctuates on Nozzle and Bed

Post by Admin » Thu Nov 04, 2021 4:38 pm

Or you should try to print with TF card, let's see whether there's still the same problem.

Duckdodgers
Posts: 4
Joined: Fri Jan 15, 2021 8:00 am

Re: Temperature fluctuates on Nozzle and Bed

Post by Duckdodgers » Sun Nov 07, 2021 6:16 pm

Thankas for the info. I was suspecting min board or power supply. Tried settiing the warm up/cool down from the printers controls and I can't repeat the problem.

I will keep an eye on it for now.

Post Reply