Geeetech A10 Pro doesn't start up

Post Reply
5StarStunna
Posts: 1
Joined: Thu Sep 17, 2020 4:08 pm

Geeetech A10 Pro doesn't start up

Post by 5StarStunna » Thu Sep 17, 2020 4:18 pm

Hello,
my Geeetech A10 Pro doesn't start up, the display is staying "black" and nothing happens...
I opened the cover and just the red led in the upper left of the board is glowing (red) at the moment.
Everything is connected correct and no wrong polarity.
Hope someone can help me with that issue. :?
Top
User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Geeetech A10 Pro doesn't start up

Post by William » Thu Sep 17, 2020 5:18 pm

Hello, maybe there is a problem with your LCD wiring, you can unplug it and reinstall it, and fasten it with a cable tie. You can also try to connect to the computer to see if it can start normally.If possible, please also provide pictures to better solve your problem. :D
Regards
-Keep your mind and try to test it. :)
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Top
Post Reply

Return to “Geeetech A10 Series”