From A10 pro v4 to A10M pro

Post Reply
Alessandro Iannelli
Posts: 2
Joined: Mon Aug 31, 2020 4:22 am

From A10 pro v4 to A10M pro

Post by Alessandro Iannelli » Mon Aug 31, 2020 4:35 am

Ho. I'm New user ...
what do you need to add mix mode? double extruder + kit hot end (a10m) + firmware + cable ... and then? thanks

Double extruder have Twio engine ?
Thanks
Top
User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: From A10 pro v4 to A10M pro

Post by William » Mon Aug 31, 2020 4:14 pm

Hello, if you want to upgrade to a10m, you need two extruders, one hot end, and change the firmware to a10m. :D
Two extruders need two engines.
-Keep your mind and try to test it. :)
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Top
Alessandro Iannelli
Posts: 2
Joined: Mon Aug 31, 2020 4:22 am

Re: From A10 pro v4 to A10M pro

Post by Alessandro Iannelli » Mon Aug 31, 2020 7:34 pm

Thanks... I'll buy It .
Top
Post Reply

Return to “Geeetech A10 Series”