Having some more thermal runaway issues with my heated bed. Is there any way to adjust these settings using gcode commands by chance? I dont really want to recompile the firmware. Running Verts 2+ Build 493. Also Ive got a a10m and changed to a non geared extruder. What specific lines do i need to change to get the extruders to run the right way now?
I know the thermal runaway is probably not in a gcode command but wanted to ask. If I am going to recompile Id like to know where to fix the extruder direction is, as I dont remember now.
Thermal runaway longshot
Re: Thermal runaway longshot
Hi，if you need to change the direction of the motor,
you can refer to this:viewtopic.php?f=17&t=17037
you can refer to this:viewtopic.php?f=17&t=17037
-Keep your mind and try to test it. 
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Re: Thermal runaway longshot
thanks i somehow missed it like an idiotWilliam wrote: ↑Fri Apr 24, 2020 10:26 amHi，if you need to change the direction of the motor,
you can refer to this:viewtopic.php?f=17&t=17037