Marks on side of benchy

Post Reply
evant8950
Posts: 9
Joined: Thu Dec 26, 2019 2:56 am

Marks on side of benchy

Post by evant8950 » Fri Jan 03, 2020 6:07 am

Hey everyone

I’m getting close on getting the benchy perfect. Would anyone have any idea on what is causing these marks on the side?
Attachments
7E7D2260-D462-4397-9388-0EF1EA1718F1.jpeg
7E7D2260-D462-4397-9388-0EF1EA1718F1.jpeg (534.49 KiB) Viewed 4495 times
Top
User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Marks on side of benchy

Post by William » Fri Jan 03, 2020 9:49 am

:D Hi, Are you referring to the trace on your bottom?
You can try to adjust the hot bed,
Do not print too fast.
-Keep your mind and try to test it. :)
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Top
evant8950
Posts: 9
Joined: Thu Dec 26, 2019 2:56 am

Re: Marks on side of benchy

Post by evant8950 » Fri Jan 03, 2020 12:04 pm

The little marks on the side. It was hard to capture on camera. Thanks!
Top
User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Marks on side of benchy

Post by William » Fri Jan 03, 2020 2:20 pm

:D Hi, You can check the esteps on the screen,
Then see if your machine is loose, you can do it
Fastening treatment.
-Keep your mind and try to test it. :)
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Top
Jarda3d
Posts: 189
Joined: Sat Jan 26, 2019 8:42 am

Re: Marks on side of benchy

Post by Jarda3d » Sat Jan 04, 2020 11:58 pm

it is probably un-aligned joints
A10M Slic3r profile: here and fresh on github (lot of tips here)
A10 Slic3r profile: here
TIP: tight all screws and wheels (except right side of Z axis) and re-align frame while assembly. And silence it.
Top
Post Reply

Return to “Geeetech A10 Series”