Is there a place to buy a suitable replacement hotend fan ? There's only a 3010 12v fan on Geeetech's online shop.
Mine blowned a few weeks ago and since then, no matter which fan I install, I'm unable to print anything but PLA without heat creaping. I've tried everything I could, changed the hotend by a replacement I had, tried different new nozzles, changed the PTFE tube to Capricorn tubing ... no matter what I do, anything requiring above 230deg clogs the hotend.
Replacement hotend fan
Re: Replacement hotend fan
Hi, If your power supply is 24V,
You need a fan that corresponds to it.
You can contact your sales for detailed inquiries.
You need a fan that corresponds to it.
You can contact your sales for detailed inquiries.
-Keep your mind and try to test it. 
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Re: Replacement hotend fan
Power supply is 24v as well as the fans I've tried. It's a matter of air flow than anything else.