A10m heat break Jammed

Post Reply
User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: A10m heat break Jammed

Post by William » Tue Sep 10, 2019 6:44 pm

Hi, If you are referring to consumables stuck,
You can try to heat the hot end to 200° and then use the tool to push the consumables out.

If the nozzle is clogged, the specific operation can refer to this:https://www.youtube.com/watch?v=uKxPIGal74E
If the hot end itself breaks, it is recommended to replace it.

I hope this can help you.
-Keep your mind and try to test it. :)
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Top
Post Reply

Return to “Geeetech A10 Series”