Print drifts

[Chub]

Is this something loose or y axis step is off. Or something else? How do I fix?
The dog came out perfect. Everything else drifts forward. Great bed adhesion.

[William]

Hi， Hi, You can do the following checks
1. Check the tightness of each shaft and make appropriate adjustments.

For details, please refer to this:

https://www.youtube.com/watch?v=QmrT1sPhvf8

https://www.youtube.com/watch?v=ZoOaT5fkgfg

2. Check whether the bearing and the pulley are issued (the card can be lubricated for lubrication);

3. Appropriately reduce the printing speed, the reference range is 30-60mm / s.

I hope this can help you.