Dead gt2650 board

Post Reply
weldingboy73
Posts: 3
Joined: Tue Jul 30, 2019 6:35 am

Dead gt2650 board

Post by weldingboy73 » Tue Jul 30, 2019 6:38 am

Hi im new to the forum!! and a new user of an Geeetech A10 printer
im here because i need serious help my board is dead after one week of use... my question is can i replace my board with a ramps set up or mks gen l style board? i cant find any firmware or instruction on this alternative so thanks in advance for your help im very dissapointed now its brand new and useless :roll:
Top
User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Dead gt2650 board

Post by William » Tue Jul 30, 2019 9:21 am

Hi， Can you describe your motherboard in detail?
The map of the GT2560 board is open source and you can download it for viewing.
refer to this: https://www.geeetech.com/download.html?download_id=43
-Keep your mind and try to test it. :)
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Top
weldingboy73
Posts: 3
Joined: Tue Jul 30, 2019 6:35 am

Re: Dead gt2650 board

Post by weldingboy73 » Wed Jul 31, 2019 12:24 am

thats ok im gonna receive another gt2650 v 3 mine is totaly dead keep blowing fuses and the hot bed start heating by itself without any command thats weird
Top
Post Reply

Return to “Geeetech A10 Series”