GeeeTech Color Mixing Software does not change the G Code

Jorgie · Post by **Jorgie** » Sat Mar 02, 2019 9:34 am

I've downloaded, and installed, the windows version of the GeeeTech Color Mixing Software.
Imported a g code file generated by Slic3r.
Coloured the print and then exported the G code.
The input file and output file are identical.

So my conclusion is the software does not work.

Any suggestions?

Post by **William** » Sat Mar 02, 2019 10:12 am

I think you should attach the gcode file at first.
Then we can help to check it.
cheers

Jorgie · Post by **Jorgie** » Sat Mar 02, 2019 10:21 am

Really no point in attaching the G-Code. You can use any G-Code produced by Slic3r to check to see if the software modifies the G-code.
I did try and up load the files, even though they are the same, but the site will not allow the files to be added. Invalid file extention.

Post by **William** » Sat Mar 02, 2019 10:37 am

You can upload the gcode to Google drive then attach the link or upload the zip type files.
You can check the gcode have the "T0/T1" or not
It means the extruder Switch.

Jorgie · Post by **Jorgie** » Sat Mar 02, 2019 11:07 am

Just been told on another forum that the colour mixer software does not work in vase mode!

Post by **William** » Sat Mar 02, 2019 1:44 pm

I think should bet with you.Lol
It seems work with vase mode

: vase mode with color mixer.jpg (209.49 KiB) Viewed 23309 times

A10M_rocket vase-1.zip: (1.06 MiB) Downloaded 795 times

Jorgie · Post by **Jorgie** » Sun Mar 03, 2019 5:23 am

That's great William, the software works for you. Your vase walls seem to be quite thick, so perhaps the software works when the wall thickness is over a certain value.

The G-Code being imported compared to the G-Code that is being exported is the same. So you can look all you like but you won't be able to help me.

The forum does not allow me to directly upload a file, instead I have to use a work around, I see that you are a site admin, so perhaps you could fix that also.

Post by **_kaktus_** » Sun Mar 03, 2019 2:20 pm

Hello.

We attach compressed files to posts.
You can easily compress your file to ZIP format, and then you will attach it successfully.

We can then be sure that the attachment is not damaged during upload.

This rule does not apply to image files.

Post by **William** » Mon Mar 04, 2019 2:21 pm

Hi,guys!
Kaktus is correct.You can refer to it then upload the zip type file

Jorgie · Post by **Jorgie** » Wed Mar 06, 2019 6:27 pm

So, William, are you still asking me to upload my G code files?
If so, can you please explain your logic? Because I am lost as to why you do not accept that the input file is the same as the output file.
I am asking for help and an Admin quite happily says the software work for him, but does not offer help to understand why it works for him but not me.
Is it the wall thickness? Is it something else?

Geeetech

GeeeTech Color Mixing Software does not change the G Code

GeeeTech Color Mixing Software does not change the G Code

Re: GeeeTech Color Mixing Software does not change the G Code

Re: GeeeTech Color Mixing Software does not change the G Code

Re: GeeeTech Color Mixing Software does not change the G Code

Re: GeeeTech Color Mixing Software does not change the G Code

Re: GeeeTech Color Mixing Software does not change the G Code

Re: GeeeTech Color Mixing Software does not change the G Code

Re: GeeeTech Color Mixing Software does not change the G Code

Re: GeeeTech Color Mixing Software does not change the G Code

Re: GeeeTech Color Mixing Software does not change the G Code