Page 1 of 1
printed parts "welded" to the blue tape
Posted: Wed May 02, 2018 9:44 pm
by skypuppy
Am I doing something wrong, like maybe the bed is too close to the nozzle? The blue painters tape is very hard to clean off the newly printed parts, and of course the tape is ripped up when trying to remove the part from it. How do I clean the parts already printed and how do I stop this from happening???
Thanks for any help.
Re: printed parts "welded" to the blue tape
Posted: Fri May 04, 2018 12:53 pm
by orenjikuma
It is possible that the first layer is indeed too squished causing it to fuse to the tape. I would suggest getting a PEI sheet for easy maintenance and not having to worry about the aforementioned issue.
Re: printed parts "welded" to the blue tape
Posted: Sat May 05, 2018 8:36 pm
by skypuppy
Increasing the Z offset to +0.9 pretty much fixed that problem. Don't know why it does that.
Re: printed parts "welded" to the blue tape
Posted: Sun May 13, 2018 3:06 am
by skypuppy
and I don't know what "PEI sheet" is.
Re: printed parts "welded" to the blue tape
Posted: Mon May 14, 2018 12:27 pm
by _kaktus_
[quote=skypuppy post_id=84154 time=1526151984 user_id=65415]
and I don't know what "PEI sheet" is.
[/quote]
https://www.google.com/search?q=pei+she ... 92&bih=977
:D