Geeetech

Posted: **Sat Feb 13, 2021 6:27 am**

After measuring with a caliper, My Z axis seems to move 10 times farther than specified, no matter what slicer I use. I tried reflashing the Marlin firmware and shifting the potentiometer on the z-axis motor driver but I still can't seem to fix this. I haven't been able to get anything properly printed!

Any help would be appreciated.

Posted: **Fri Mar 19, 2021 8:33 am**

Hi,

I have the same issue... 6mm Z travel instead of 1 mm !!!!

Please help

Posted: **Fri Mar 19, 2021 11:51 am**

Hello, please check the step value of the z-axis, it may be too large and can be adjusted.

Geeetech

3D printer Z axis Moves 10 times farther, 100 mm instead of 10 mm

3D printer Z axis Moves 10 times farther, 100 mm instead of 10 mm

Re: 3D printer Z axis Moves 10 times farther, 100 mm instead of 10 mm

Re: 3D printer Z axis Moves 10 times farther, 100 mm instead of 10 mm