Extruder going in the wrong direction
Posted: Tue Mar 19, 2019 5:04 am
Hi guys,
At a loss on why my extruder is pushing the filament out instead of 'sucking' it in.
Does anyone else have any other ideas?
All of those methods above result in my extruder pushing the filament out.
At a loss on why my extruder is pushing the filament out instead of 'sucking' it in.
Code: Select all
- Flashed the firmware and set
- - #DEFINE INVERT_E0_DIR true
- - #DEFINE INVERT_E0_DIR false
- - - I also set all extruders to true/false
- Swapped the plug around
- Tried different printing softwareDoes anyone else have any other ideas?
All of those methods above result in my extruder pushing the filament out.