Geeetech

Posted: **Sun Sep 02, 2018 2:26 am**

When I drive with the z axis it moves instead of (0.1 mm to 1mm ) (1mm to 10mm) what can I do , pls help me

Sorry for my bad english

Posted: **Mon Sep 03, 2018 6:35 pm**

The Z step seems not correct, it goes up too much as it should.
If you have T8 rode, try to calibrate the proper Z step/mm.
http://geeetech.com/forum/viewtopic.php?f=82&t=60931
Point No.7.

Z axis problem