Cannot print

Post Reply
RAO003
Posts: 1
Joined: Sun Aug 19, 2018 8:12 pm

Cannot print

Post by RAO003 » Mon Aug 20, 2018 3:25 pm

.
Last edited by RAO003 on Wed Oct 10, 2018 7:09 pm, edited 1 time in total.
Top
User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Cannot print

Post by William » Mon Aug 20, 2018 4:50 pm

You'd better check the PSU output voltage normal or not(12V)
It seems the PSU doesn't work.
-Keep your mind and try to test it. :)
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Top
axman
Posts: 5
Joined: Thu Aug 16, 2018 12:08 pm

Re: Cannot print

Post by axman » Wed Aug 22, 2018 10:15 pm

Does the control panel light up? If so, can you control the printer with it? You should be able to do that even with the computer disconnected.
Top
User avatar
_kaktus_
Site Admin
Posts: 1260
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:
Contact _kaktus_

Re: Cannot print

Post by _kaktus_ » Wed Aug 22, 2018 10:19 pm

Hi
:mrgreen:

axman - when the printer is properly built and powered on, the LEDs on the controller board should light up.
;)
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.
Top
Post Reply

Return to “Geeetech I3 Pro W”