Page 1 of 1
I3 Pro C running Marlin 2.x ??
Posted: Thu Mar 05, 2020 5:29 am
by Softfoot
Is there a working configuration file set for the I3 Pro C under Marlin 2.x ??
If so, is it known to work out of the box ??
Best regards,
Dave
Re: I3 Pro C running Marlin 2.x ??
Posted: Thu Mar 05, 2020 10:06 am
by William
Hi,You need to find the corresponding configuration and flash the firmware.
Re: I3 Pro C running Marlin 2.x ??
Posted: Tue Apr 21, 2020 2:39 am
by rmrodrigues
Hi there,
Is there any guide to help us getting the firmware updated? We just need to change the Configuration.h file in order to keep the configuration? Is there any documentation about this?
Cheers,
rmrodrigues
Re: I3 Pro C running Marlin 2.x ??
Posted: Tue Apr 21, 2020 10:03 am
by William
rmrodrigues wrote: ↑Tue Apr 21, 2020 2:39 am
Hi there,
Is there any guide to help us getting the firmware updated? We just need to change the Configuration.h file in order to keep the configuration? Is there any documentation about this?
Cheers,
rmrodrigues
Hi，you can download the latest firmware from this link:
viewtopic.php?f=10&t=17046.
Re: I3 Pro C running Marlin 2.x ??
Posted: Wed Apr 22, 2020 3:32 pm
by rmrodrigues
Sorry William, i was not clear.
I was referring to get the latest Marlin version and adapt that version to run on our Geeetech printers.
Re: I3 Pro C running Marlin 2.x ??
Posted: Wed Apr 22, 2020 4:02 pm
by William
Hi，we have not used the latest version of Marlin firmware, nor have we tested it.
Re: I3 Pro C running Marlin 2.x ??
Posted: Wed Apr 22, 2020 4:14 pm
by rmrodrigues
If I want to test it, which steps do you recommend?
Re: I3 Pro C running Marlin 2.x ??
Posted: Tue Apr 28, 2020 7:01 am
by boelle
Softfoot wrote: ↑Thu Mar 05, 2020 5:29 am
Is there a working configuration file set for the I3 Pro C under Marlin 2.x ??
If so, is it known to work out of the box ??
Best regards,
Dave
https://github.com/MarlinFirmware/Confi ... %20Pro%20C
Re: I3 Pro C running Marlin 2.x ??
Posted: Tue Apr 28, 2020 7:02 am
by boelle