i3 pro c in pro b conversion

Post Reply
Limon1
Posts: 25
Joined: Sat Jan 30, 2021 7:33 am

i3 pro c in pro b conversion

Post by Limon1 » Fri Mar 11, 2022 8:14 pm

Hi,
is it possible to remove an unused extruder and hot end from i3 pro c?
I already have removed the stepper, but if I remove the temperature sensor the printer Fail.
If I upload Pro b firmwere, would it work https://snaptube.cam/?
Top
Post Reply

Return to “Geeetech I3 Pro C”