Is it possible to get Megatronics working with the Reprapdiscount Full Graphic Smart Controller?
http://www.reprapdiscount.com/home/34-f ... oller.html
I have the adaptor you make to work with your smart controller and they are very similar. It would help a lot if the silkscreen on Megatronics had more info around the headers if only marking PIN1 of any given header.
Difficult to use a pinout when you don't know the pins.
Thanks for any help
Full Graphic Smart Controller, with Megatronics
-
scottmaher
- Posts: 1
- Joined: Mon Sep 23, 2013 3:21 am
-
techsupport
- Site Admin
- Posts: 210
- Joined: Sat Mar 03, 2012 2:32 pm
Re: Full Graphic Smart Controller, with Megatronics
Hi,
Yes, it can work with Reprapdiscount Full Graphic Smart Controller. You need to connect them by jumper wires.
Thanks for your suggestion about silkscreen, we'll taking it into consideration.
Have a nice day!
Yes, it can work with Reprapdiscount Full Graphic Smart Controller. You need to connect them by jumper wires.
Thanks for your suggestion about silkscreen, we'll taking it into consideration.
Have a nice day!
Your real trustworthy partner in China!!
Email: forum@geeetech.com
Email: forum@geeetech.com
-
steeve_becker
- Posts: 1
- Joined: Mon Dec 09, 2019 11:39 pm
Re: Full Graphic Smart Controller, with Megatronics
I know megatronics V2.0 is obsolete ...
anyway I got one and a LCD, I spent time to make its working with Repetier last version,
now it works, please forget the smart connector and use your own wires like this :
]
anyway I got one and a LCD, I spent time to make its working with Repetier last version,
now it works, please forget the smart connector and use your own wires like this :
- Wiring for 12864 reprap Full grafic LCD on megatronics V2.0 and V3.0
- Capture d’écran 2019-12-09 à 16.42.46.png (393.35 KiB) Viewed 106516 times