Geeetech

I've spent quite a bit of time looking through the forum and haven't seen any links so, i'm asking if there are any links to the "Build Instructions and/or User Manual" for the M201 DIY printer.

I'm thinking of purchasing a kit ans i want to look over the build process prior to committing.

Any help would be greatly appreciated.

Larry

Hi, you can contract your seller.

Hi.


The documents you are asking for have been removed from the GT homepage.
But they are posted on the forum in one of the posts.

The best manual is our modest forum. In case of any complications, I will be happy to help you with any problems you may have.

I can also tell you that this is an excellent design. Maybe some components are/were of poor quality but the whole thing can work perfectly. (I mean linear guides)

You should also know that this will be an excellent test of your talent, skills, and character.

I have a few friends - M201 owners - who managed to build and run this model very well. And they don't complain.
Some have lost their patience and abandoned this model in favour of another GT brand.
Others are still doing very well, and will probably be working to develop this model.

I'm still working on improving reliability and speeding up printing.

ok.


Look here.


Let's just say this is the first time I've worked instead of you. And let it be the last time

These instructions are very well prepared.
But for the newcomer I was once, they weren't detailed enough in a few places.
However, I did not fall.
There were also instructional videos available on YT.

You could jokingly say it's a printer for the tough guys.

Thank you for the links. I've been working on my own "build" of an i3 using 2020 extrusion. Its working quite well with the GT2560A+ board and MK8 extruders. But the extruders ARE MK8s and trying to adjust the two to allow for dual extruder printing is VERY frustrating. The M201 with its switching extruder would eliminate that issue.

Hi.


In my opinion, the M201 model can be a very good base for doing various experiments. For a do-it-yourselfer it can be a real rarity.
If you already have a different GT printer model, it will be easier with the next one. No matter what it is.


It is also a perfect didactic and scientific "tool".

You can learn a lot by starting your crazy adventure in the 3D world with this printer.