Hi
I am having problems with my layers in the Z offset does it keep settings for the next print?
I have put a few more pictures of my first layer to google drive do you have any suggestions to improve them as I am not having much luck.
https://drive.google.com/drive/folders/ ... sp=sharing
Extruder fans are they on all time as I have one on all the time and the other starts and stopps?
Thanks
organic
extruder motor i think.
Re: extruder motor i think.
Hi, the first layer looks okay, there may be gaps in the gap, you can print a few more layers to see the effect.
The fan that cools the hot end is always working, and the blower that cools the consumables can be controlled.
The fan that cools the hot end is always working, and the blower that cools the consumables can be controlled.
-Keep your mind and try to test it. 
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Re: extruder motor i think.
Hi
OK thanks for that.
The fans I mean I have two extruders with fan on each one they are not near the hotend and it doesent mater whitch one I am using to print with one fan comes on and stays on as soon as I stat printing evan if using the other extruder and the other one starts and stopps all the time weather extruder is being use or not.
Thanks
organic
OK thanks for that.
The fans I mean I have two extruders with fan on each one they are not near the hotend and it doesent mater whitch one I am using to print with one fan comes on and stays on as soon as I stat printing evan if using the other extruder and the other one starts and stopps all the time weather extruder is being use or not.
Thanks
organic