Geeetech

Attn Geeetech,
can you please provide the design files for the acrylic frame parts? I would like to make my own replacement frame parts for the Y-axis frame on my geeetech I3 pro X.

At the minimum, can you please provide the dimensions & spacing for the holes for the threaded rods & smooth rods of the Y-axis on the I3 pro X? This way, I can design my own parts.

Thanks,

Y-axis polished rod size: 420mm, φ8
Y-axis threaded rod size: 450mm M10

Admin,
thanks, but I meant the dimensions/distances between the holes. I need to replace the acrylic plates for the Y-frame. I want to rebuild the Y-frame with the traditional prusa I3 design, using threaded rods & 3D printed parts, instead of using a solid acrylic plate.

I need to know the height & distances between the threaded & smooth rods.
Please see picture:

Hello.


Many elements of printers are available on the forum. Unfortunately, this is done quite haotically.

As a reminder, I will repeat the ones that were made available earlier.

• 2018-01-22 11:36 252˙584 PI3B1-C08-z-top.STL
  2018-01-22 11:37 139˙984 PI3B1-C09-PlatformH.STL
  2018-01-22 11:37 187˙284 PI3B1-C10-PlatformH.STL
  2018-01-22 11:37 163˙484 PI3B1-C11-PlatformH.STL
  2018-01-22 11:37 182˙984 PI3B1-C12-PlatformH.STL

  Pro X stl.zip

  STL file parts

  (184.73 KiB) Downloaded 777 times

• 2018-08-13 11:46 117˙084 A6.STL
  2018-08-13 11:47 102˙984 A7.STL
  2018-08-09 08:24 182˙984 PI3B1-C12-PlatformH.STL
  2018-08-09 08:26 145˙284 PI3B1-C13-Ymotor.STL
  2018-08-09 08:27 95˙484 PI3B1-C14-fixer for yplatform.STL
  2018-08-09 08:28 147˙784 PI3B1-C17-XMotorTB.STL
  2018-08-09 08:28 323˙884 PI3B1-C29-Carriage.STL

  I3 X.zip

  STL file parts

  (223.69 KiB) Downloaded 777 times

Files can be used for private use, and should not be shared with other services.

When you have finished your project, show off your work.

Do you know basketball stars? This is a popular sports game today. It can help you to relax after a long day working or studying. Try playing it to have funny moments.