Page 1 of 1
temperature problem when printing
Posted: Tue Apr 30, 2019 10:42 pm
by Rush68
Hello everyone, I have a problem when I print.
I bought a Delta Rostock mini G2s pro, it starts printing very well and I already printed several pieces, but now it gives me an error of maximum temperature reached at a certain moment of the printing, which could be, I use the program repetier-host v2 .1.3
Re: temperature problem when printing
Posted: Tue Apr 30, 2019 11:53 pm
by _kaktus_
Hello.
Have you tried to lower the temperature by e.g. 5°C?
Repetier Host draws graphs for temperature, you can analyze what happens over time.
Re: temperature problem when printing
Posted: Wed May 01, 2019 12:40 am
by Rush68
ok, thanks, I'll try
Re: temperature problem when printing
Posted: Wed May 01, 2019 3:20 am
by Rush68
decreased 8 degrees centigrade and I still have the same problem
Re: temperature problem when printing
Posted: Wed May 01, 2019 3:53 am
by _kaktus_
Hi.
Have you seen the temperature chart in RepetierHost?
Can you show the screen
Re: temperature problem when printing
Posted: Thu May 02, 2019 11:11 pm
by Rush68
hi here is the screenshot of the problem
- problema temperatura.jpg (278.38 KiB) Viewed 12780 times
Re: temperature problem when printing
Posted: Tue Jun 11, 2019 11:18 am
by Rush68
Hello everyone, thanks to everyone, it is noted that in this forum is supported, I already solved it were thermistors, thanks for your help