Geeetech

Hello!

I think is possible wire flex for connect LCD and main borard is damage, i´d like if can tell me where buy this .

Hi, for those specific items, you can directly contact the sales.

I put message for test if other buyers have same problem... or only for me

Hi


FFC tape (Flexible Flat Cable) is not expensive.
This can be purchased from any online shop with electronic components.

You just need to know exactly what you are looking for.
The haracretic feature is the raster of leads.
Next, the number of wires, length. You must also make sure that the leads are on the same side, on both ends.

The cable type also specifies the code on the cable surface.
For example, my printer uses FFC tape AWM 20624.

thanks for your info... support tell me I must replace board and lcd kit. I have a problem with lcd ad SD never read....

thanks!

Had an issue where i got home to failed print and after i removed everything and wanted to start over i found that the bed would not heat up.
Then i had a closer look at the board and found that the PSU plug was all burned on one of the 12volt rails.

now i have to locate new plugs and solder a new one on to the board and hope nothing is fried.

But i cannot understand why / how this could have happend as the plug on the board and the cord are something what i made form the factory and not something you have to assemble your self.https://9apps.ooo/

If you are looking for a game then poppy playtime will be a satisfying game for you if you are looking for a way to provide some downtime for you and your kids. There are hundreds of fun and exciting games available for you to try.