hotend thermistor does not work correctly
how to configure the PID?
repet - the temperature that the printer shows
T0 - the real temperature shown by the laboratory temperature meter
- WP_20190408_09_15_36_Pro.jpg (125.47 KiB) Viewed 7886 times
fail temp on hotend
fail temp on hotend
rostock 301
hotend thermistor does not work correctly
how to configure the PID?
repet - the temperature that the printer shows
T0 - the real temperature shown by the laboratory temperature meter
hotend thermistor does not work correctly
how to configure the PID?
repet - the temperature that the printer shows
T0 - the real temperature shown by the laboratory temperature meter
Re: fail temp on hotend
Sorry,the Rostock 301 not support PID auto-tuning.
The firmware of 301 is the smartto:
https://github.com/Geeetech3D/Smartto-Eclipse
The firmware of 301 is the smartto:
https://github.com/Geeetech3D/Smartto-Eclipse
-Keep your mind and try to test it. 
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!