The first layers while printing look strange
Posted: Thu May 12, 2022 8:51 pm
I own a Geeetech i3 Pro W and I started printing today. Amazing how it works.
I just recognized while printing my first bigger model something very strange: At the beginning some parts are missing and there are huge holes. However when I keep it printing the following layers "fix" the issue. I'm wondering what I'm doing wrong.I also follow the whole instuction from here: https://www.geeetech.com/specialpage/i3/i3.htmlindustial-table
I almost forgot to mention that I think I'm using that PLA, the bed has a temperature of 60 °C and the extruder 200 °C.
Here are two pictures after about 1 layer and after about 4 layers:
I just recognized while printing my first bigger model something very strange: At the beginning some parts are missing and there are huge holes. However when I keep it printing the following layers "fix" the issue. I'm wondering what I'm doing wrong.I also follow the whole instuction from here: https://www.geeetech.com/specialpage/i3/i3.htmlindustial-table
I almost forgot to mention that I think I'm using that PLA, the bed has a temperature of 60 °C and the extruder 200 °C.
Here are two pictures after about 1 layer and after about 4 layers: