I3 Pro B 3D Touch Installation Success?
Posted: Mon Sep 13, 2021 10:42 pm
Geeetech I3 Pro B - 3D Touch Setup - my route to a successful installation
There are lots of posts on this forum regarding installation of 3D Touch and having just spent several hours installing a 3D Touch onto my Geeetech I3 Pro B I thought I’d share with you my route to success which might help you avoid the mistakes I made on the way.
All of the information is available, it just isn’t all in one place and isn’t all coherent. This isn’t a comprehensive guide but if you follow it, together with the resources I point to, I’m sure it will save you a lot of time.omegle xender
Step 1 Establish what your hardware is.
Motherboard Version. There are 2 basic motherboard configurations which affect the installation. I’ll refer to them as 2560A and 2560A+. the significant difference for this installation is that A+ is physically configured to accommodate a 3D Touch while the A needs some work. The easiest way to identify them is by examining the end-stop sockets. If they all align then its an A+ if they don’t its an A. You may need to make up the extension cables differently depending on which version you have.
There are lots of posts on this forum regarding installation of 3D Touch and having just spent several hours installing a 3D Touch onto my Geeetech I3 Pro B I thought I’d share with you my route to success which might help you avoid the mistakes I made on the way.
All of the information is available, it just isn’t all in one place and isn’t all coherent. This isn’t a comprehensive guide but if you follow it, together with the resources I point to, I’m sure it will save you a lot of time.omegle xender
Step 1 Establish what your hardware is.
Motherboard Version. There are 2 basic motherboard configurations which affect the installation. I’ll refer to them as 2560A and 2560A+. the significant difference for this installation is that A+ is physically configured to accommodate a 3D Touch while the A needs some work. The easiest way to identify them is by examining the end-stop sockets. If they all align then its an A+ if they don’t its an A. You may need to make up the extension cables differently depending on which version you have.