Geeetech

Posted: **Thu Jul 23, 2020 4:33 pm**

Hi

Can anyone please help me? With my 3d touch can i do the z homing but when i try to level my bed my z axes runs on my glasplate

Thank you

Posted: **Wed Jul 29, 2020 6:02 am**

Hi,
Without knowing which version of the firmware you're using...
When I installed my firmware, I started out with a BL Touch.
I used the firmware Marlin-1.1.9_bugfixes_02102019 given by wwysocki...
It ran 1st time for me.
https://www.geeetech.com/forum/viewtopi ... 412#p90623
From memory, this also has the configuration.h file already configured for T8 leadscrews - but that's a simple mod.
What version of the firmware are you using ?
Gerry

Posted: **Thu Aug 27, 2020 5:09 pm**

GAQ wrote: ↑
Wed Jul 29, 2020 6:02 am
Hi,
Without knowing which version of the firmware you're using...
When I installed my firmware, I started out with a BL Touch.
I used the firmware Marlin-1.1.9_bugfixes_02102019 given by wwysocki...
It ran 1st time for me.
https://www.geeetech.com/forum/viewtopi ... 412#p90623
From memory, this also has the configuration.h file already configured for T8 leadscrews - but that's a simple mod.
What version of the firmware are you using ?
Gerry

Very informative and useful article for beginners!

Geeetech

Leveling Problem what do i wrong

Leveling Problem what do i wrong

Re: Leveling Problem what do i wrong

Re: Leveling Problem what do i wrong