Extruding problem

Post Reply
JyriFin
Posts: 1
Joined: Wed Mar 20, 2019 4:42 pm

Extruding problem

Post by JyriFin » Wed Mar 20, 2019 5:05 pm

Hello.
I bought a working printer. I messed with the belt and few mechanical parts and the extruder stopped feeding.

I took the hotend away, so it is still connected (otherwise it doesnt feed) and tested the extruder, just jamming. If I push the filament down it goes pretty well. I try to feed it down but nothing. But If order move the extruder to minus, the extruder pulls the filament easily and stable.
Top
User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Extruding problem

Post by William » Thu Mar 21, 2019 2:38 pm

I suggest you refer to the FAQ post at first.
>Geeetech I3/DIY Printer series<
Then you will know how to check it.
-Keep your mind and try to test it. :)
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Top
Post Reply

Return to “Geeetech I3 Pro B”