Wobbly XY surface
Posted: Wed Sep 19, 2018 7:40 pm
I'm aware of the wobbly ZY plane caused by the vertical rods not being straight, but I'm experiencing a very irregular XY plane on big prints and I wonder what might be causing this.
https://imgur.com/a/F1aSLGR
The effect is greatly visible on the left side of the printer, but seems worse on the back side of the plate (Y carriage toward the front) so I'm wondering if I have a bent frame or something lose...
https://imgur.com/a/F1aSLGR
The effect is greatly visible on the left side of the printer, but seems worse on the back side of the plate (Y carriage toward the front) so I'm wondering if I have a bent frame or something lose...