Delta G2S with 301 Diamond Nozzle
Posted: Wed Feb 14, 2018 3:45 am
Hello all together!
I'am not satisfied with the Quality of my dual Color prints. My G2S with two nozzles is hard to adjust, so ist dificult to calibrate for both nozzles and ist also hard to get a good print.
Now i want to switch my two nozzle heatend from G2S to the 301 Diamond heatend. Of course just with 2 Extruders instead of 3.
My Problem now in the Firmware is:
G2S has two heating elements, each per hotend, now i have just one heating element for both hotends.
Can u please tell me at wich line in the Firmware i can fix it? In my opinion the Firmware has to know that for Extruder 1 and 2 had to use heating element and thermisor of Extruder 1.
I hope you understand me ;-)
Can u please help?
I'am not satisfied with the Quality of my dual Color prints. My G2S with two nozzles is hard to adjust, so ist dificult to calibrate for both nozzles and ist also hard to get a good print.
Now i want to switch my two nozzle heatend from G2S to the 301 Diamond heatend. Of course just with 2 Extruders instead of 3.
My Problem now in the Firmware is:
G2S has two heating elements, each per hotend, now i have just one heating element for both hotends.
Can u please tell me at wich line in the Firmware i can fix it? In my opinion the Firmware has to know that for Extruder 1 and 2 had to use heating element and thermisor of Extruder 1.
I hope you understand me ;-)
Can u please help?