Page 1 of 1
Pulsar i3 pro b .. LCD blank .. firmware issue
Posted: Fri Feb 02, 2018 6:54 am
by Nickallen69
Hello please can anyone help me out .. ive had an issue with the Y axis not returing to stop switch so all i wanted to do was reverse the direction in the firmware .. once i updated the firmware (and it worked fine) then i changed the direction within configuration.. and verified and uploaded it to my printer .. its said complete but my LCD screen has gone blank with two rows .. its done this once before but it sorted itself out when i uploaded the firmware again .. this time its not having any of it for some reason .. im truely stuck.. its not a wireing issue .. its something to do with the firmware and when i upload it .. any info would be great thanks nick allen.
Re: Pulsar i3 pro b .. LCD blank .. firmware issue
Posted: Fri Feb 02, 2018 6:04 pm
by William
Have you check the firmware is correct or not and then re-upload it again
Re: Pulsar i3 pro b .. LCD blank .. firmware issue
Posted: Fri Feb 02, 2018 10:54 pm
by Nickallen69
hello yes ive been on this forum and re downloaded the firmware and still no luck .. there's only one option of download so im going to have another look and see if there's any other firmware to try .. cheers nick.
Re: Pulsar i3 pro b .. LCD blank .. firmware issue
Posted: Sat Feb 03, 2018 2:34 am
by Nickallen69
Hi thanks for reply .. yes ive checked the firmware and also used the original firmware that has worked previously to get it back to how i had it but no luck
Re: Pulsar i3 pro b .. LCD blank .. firmware issue
Posted: Sat Feb 03, 2018 2:52 pm
by William
What is your operating system？
Mac or Windows?